Carbon King · Pelletized Activated Carbon

Pelletized Activated Carbon Manufacturer & Exporter

Carbon King manufactures pelletized activated carbon in India — coal based, extruded into uniform 4 mm pellets — for air and gas purification, VOC and odour control, biogas and flue gas treatment.

Pellets pack evenly and let gas through at a far lower pressure drop than a granular fill. With 32+ years in carbon (est. 1994) and 30,000 MT of annual capacity, we supply buyers in 18+ countries.

32+Years in Carbon · Est. 1994
30,000 MTAnnual capacity
18+Export countries
4 mmUniform pellet diameter
The basics

What is pelletized activated carbon?

Pelletized activated carbon — also called extruded activated carbon — is made by pulverising selected bituminous coal, extruding it into uniform cylinders and then thermally activating them.

The even shape gives a bed that packs uniformly and lets air or gas flow through with very little resistance. That is why pellets are the standard carbon for gas-phase duties: moving air, process gas and vents, rather than standing water.

Why it matters

Why buyers choose Carbon King pellets

  • Low pressure drop — uniform 4 mm cylinders keep fans and blowers working at lower energy.
  • Hard pellets — 98% minimum hardness, so less dust and breakage in handling and in the bed.
  • Three activity grades — CTC 30, 50 and 60 to match your contaminant and breakthrough target.
  • Impregnated grade available — a potassium iodide impregnated pellet for acidic gases.
  • Export ready — documents, custom packing and labelling handled by our team.
Grades

Pelletized activated carbon grades

Key values are below. The full specification, test methods and grade codes are on the technical data sheet.

CK-EAC-CB

Coal Based Pelletized Activated Carbon

For air and gas streams — volatile organic compounds, odours, and gases including sulphur dioxide, nitrogen oxides, carbon monoxide, mercury, ammonia and hydrogen sulphide.

CTC activity30 / 50 / 60
Iodine value700 / 850 / 950 mg/gm
Hardness98% (min)
Apparent density450 – 550 kg/m³
Particle size4 mm diameter
Moisture< 3%
Pelletized Carbon Data Sheet
Applications

Where pelletized activated carbon is used

Air & gas purification

Removes odours, VOCs and gaseous contaminants.

VOC & solvent recovery

Adsorbs solvent vapours so they can be recovered.

Biogas purification

Removes H₂S and other contaminants, especially with impregnated grades.

Flue gas treatment

Mercury, SOx and dioxin control.

Natural gas & LNG

Strips mercury, sulphur and trace impurities.

Odour control

Sewage plants, chemical facilities and ventilation systems.

Refinery & petrochemical

H₂S and hydrocarbon vapour removal.

Respirators & gas masks

Selected grades for protective gas filtration.

See all industries on our activated carbon applications page.

Selection guide

How to choose the right pellet grade

  • CTC activity — a higher CTC value means more capacity for organic vapours — choose CTC 60 for demanding VOC duty.
  • Acidic gases — for H₂S and other acidic gases ask for the potassium iodide impregnated grade.
  • Gas or liquid? — pellets are built for gas flow; for water treatment choose granular activated carbon.
  • Read the data sheet — see how to read an activated carbon data sheet.

Not sure? Send us your gas stream, flow rate and the contaminant you want to remove, and our team will recommend a grade and quantity.

Supply

Packing, samples & export

  • Packing — bags and bulk bags; custom packing and labelling on request.
  • Samples — available before a bulk order; tell us your application and grade.
  • MOQ — depends on grade and packing; trial quantities can be discussed for new buyers.
  • Shipping — worldwide by sea in containers, with export documentation handled by our team.
  • Lead time — shared with your quotation, based on quantity, packing and destination port.
FAQ

Pelletized Activated Carbon — common questions

What is the difference between pelletized and granular activated carbon?

Pelletized carbon is extruded into uniform 4 mm cylinders, so a bed packs evenly and gas passes with a much lower pressure drop. Granular carbon is crushed and screened, and is mainly used for water and liquid treatment.

Which pellet grade should I choose?

We offer CTC 30, 50 and 60 grades with iodine values of 700, 850 and 950 mg/gm. Higher CTC suits heavier organic vapour loads; tell us your application and we will suggest one.

Do you have an impregnated pellet for H₂S?

Yes. A potassium iodide impregnated grade, CK-EAC-CB-CTC60-KI-D4, is made on the same pellet for acidic gases. Ask us for its data sheet.

Do you export pelletized activated carbon?

Yes. We supply buyers in 18+ countries and handle export documents and container shipping.

Get a price

Need pelletized activated carbon in bulk?

Share your application, grade, quantity and destination port — we reply with a quotation and a suggested grade.