Where It Works
Industries We Serve
One material, an extraordinary range of duties — from municipal water and refinery gas to wine, brewing and gold recovery.
Water & Environment
- Waste water Treatment
- Drinking Water
- Municipal Water
- Desalination Pre-Treatment
- Textile & Dye Effluent
Food & Beverage
- Soft Drinks & Beverages
- Beer & Brewing
Air, Gas & Emissions
- Air & Gas Purification
- Gas Refinery & Flue Gas
Industrial & Specialty
- Pharmaceuticals
- Chemical Processing
- Gold Recovery
- Personal Care & Cosmetics
Which activated carbon for which application
Each industry needs a different grade, particle size and raw material. Use this guide to find the right starting point, then ask our team to confirm the grade for your process.
Wastewater treatment
Activated carbon removes dissolved organics, colour and COD that biological treatment leaves behind. Granular carbon runs in fixed-bed filters for continuous polishing; powdered carbon is dosed directly when loads change.
Drinking water
Granular activated carbon removes chlorine, taste and odour compounds and many organic contaminants from drinking water. Coconut shell grades give high hardness and a fine pore structure for point-of-entry and bottled-water plants.
Municipal water
Water utilities dose powdered activated carbon for seasonal taste and odour events and run granular carbon beds for year-round treatment. Anthracite is used as the top layer in dual-media filters.
Desalination pre-treatment
Before reverse osmosis, anthracite in dual-media filters and granular activated carbon remove suspended solids, chlorine and organics that would damage or foul the membranes.
Textile and dye effluent
Dye-house effluent carries strong colour and high COD. Powdered activated carbon is dosed to remove colour, and granular carbon polishes the treated water before discharge or reuse.
Soft drinks and beverages
Granular activated carbon treats process water for soft drinks and packaged beverages, removing chlorine, taste and odour so every batch tastes the same.
Beer and brewing
Brewing water must be free of chlorine and off-flavours. Granular activated carbon filters remove them before the water reaches the brewhouse.
Air and gas purification
Pelletized activated carbon (4 mm, CTC 30–60) gives low pressure drop and high hardness in vapour-phase beds for odour, VOC and gas purification. Coconut shell granular grades are used where a finer pore structure is needed.
Gas refinery and flue gas
Pelletized and granular carbon purify process and fuel gas streams. Powdered activated carbon is injected into flue gas to capture contaminants before the stack.
Pharmaceuticals
Powdered activated carbon is used to decolourise and purify intermediates and finished liquids during pharmaceutical manufacturing. Wood-based grades are available in powder form.
Chemical processing
Activated carbon removes colour, odour and organic impurities from chemical process liquids, and granular carbon polishes process water.
Gold recovery
Coconut shell granular activated carbon is the standard carbon for carbon-in-pulp (CIP) and carbon-in-leach (CIL) circuits, where its hardness resists attrition in the tanks.
Personal care and cosmetics
Powdered and granular activated carbon purify and decolourise ingredients and the process water used in personal care and cosmetic products.
Not sure which grade you need?
Share your application, contaminant and quantity. Our team suggests a grade and sends a sample before you place a bulk order.